Tripp Lite SMART3000CRMXL 3kVA SmartPro Rackmount UPS – Chassis Only

This listing is for a Tripp Lite SmartPro SMART3000CRMXL 3kVA / 2.88kW line‑interactive rackmount UPS chassis only. No internal batteries or external battery packs are included, making this unit best suited for parts, repair, or someone who already has compatible battery modules. The unit is used and shows visible scratches and cosmetic wear on the exterior housing, but the rack ears and overall frame are intact.

The SMART3000CRMXL is a 4U reduced‑depth rack/tower UPS designed for network and telecom closets, offering sine wave output, Automatic Voltage Regulation (AVR), and multiple output receptacles when fully outfitted with batteries. It supports 3000VA/2880W with the factory L5‑30P input plug and up to 3600W when hardwired to a 120V 30A circuit in a complete configuration. This chassis includes the internal electronics, front panel, and rear connections but will require compatible batteries (such as Tripp Lite RBC94‑2U kits and/or external packs like BP48V24‑2U / BP48V48RT4U / BP48V27‑2US) to function as a full UPS.

Because this is a used item, expect normal signs of wear: surface scratches, scuffs, and marks on the steel housing and front panel. There may be minor dust in vents from previous rack use, but there are no known structural cracks or missing major panels. Please review all photos closely so you are comfortable with the cosmetic condition before purchasing.

Key Features (Unit Model Specs)

• Model: Tripp Lite SmartPro SMART3000CRMXL 120V 3kVA UPS.

• Form factor: 4U reduced‑depth rack/tower chassis, approximately 6.89" H x 17.30" W x 17.80" D, steel housing.

• Input: 120V single‑phase, L5‑30P or hardwire compatible; rated up to 30A when hardwired.

• Output (when complete): Eight 5‑15/20R outlets and one L5‑30R; three individually controllable load banks; pure sine wave output in battery mode.

• AVR: Line‑interactive Automatic Voltage Regulation with boost and trim to maintain nominal 120V output over 83–145V input range.

• Interfaces (on chassis): USB (HID), DB9 serial, EPO port and slot for optional network management card (e.g., WEBCARDLXE / SNMPWEBCARD / RELAYIOCARD).

Condition & Included Items

• Condition: Used, tested for basic power‑on only, not fully load‑tested as a complete UPS due to missing batteries.

• Cosmetics: Scratches, scuffs, and general wear on exterior surfaces; no major dents or broken rack ears noted.

• Included: SMART3000CRMXL UPS chassis only (no batteries, no external battery packs, no network card).

• Not included: Internal VRLA battery cartridges, external battery packs, rack rails, tower stands, software, manuals, or any cables not shown in photos.

Important Notes

• This is sold as UPS hardware chassis only and requires buyer‑supplied compatible batteries to operate as a backup power system

• Ideal for technicians, IT departments, or resellers who need replacement boards, housing, or a donor unit for an existing SmartPro battery setup.

• Please verify compatibility with your existing Tripp Lite / Eaton battery packs and installation hardware before purchasing.